| Description
|
Price
|
||
 |
Pegasus Black Blades for Draganfly I,II,III,IV,V Amazing new blades are nearly indestructable!
|
$24.95 |
 |
 |
Pegasus "Clear" Blades for Draganfly I,II,III,IV,V These blades are actually milky colored, and are made of a slightly stiffer material then the standard black blades. The lighter coloring will also reduce softening in direct sunlight .
|
$24.95 |
|
 |
Pegasus Yellow Blades for Draganfly I,II,III,IV,V Combine with other colors to help orientation. made of a slightly stiffer material then the standard black blades.
|
$24.95 |
|
 |
Pegasus Mint Blades for Draganfly I,II,III,IV,V Combine with other colors to help orientation. made of a slightly stiffer material then the standard black blades.
|
$24.95 |
|
 |
Dragan Fly V TI upgrade from DF III or DFIV Requires trade in of old board | $275.00 |
|
|
|
Dragan Fly V Ti Board, blades, and dome | $375.00 |
|
| Dragan Fly V TI repair ( shipping is added automaticly) | $55.00 |
|
|
 |
Dragan Fly I,II,IV,V
main rotor gear |
$5.95 |
|
 |
Dragan Fly I, II, II,III,
IV,V
Motor with brass pinion gear and filter capacitor |
$12.95 |
|
 |
Dragan Fly Frame brace
kit Includes 4 brace tubes, 4 molded corner pieces and 4 screws |
$19.95 |
|
 |
Dragan Fly I, II, II,III,
IV,V
Nylon rotor screw set of (8) 4/40 X1/1 screws |
$2.50 |
|
 |
Dragan Fly 1320
Li-Polymer battery pack I |
$69.95 |
|
|
|
Dragan Fly I, II, II,III,
IV,V
Nylon rotor screw set of (8) 4/40 X1/1 screws |
$2.50 |
|
 |
Dragan Fly I,II,IV,V spare battery connector | $2.95 |
|
 |
Dragan Fly II,III,
IV
Auxiliary power connector (5 pin) Pinouts.pdf |
$2.90 |
|
 |
Dragan Fly V
Auxiliary servo connector (10 pin )Pinouts.pdf |
$4.95 |
|
 |
Dragan Fly V
Auxiliary camera connector (3 pin) Pinouts.pdf |
$2.50 |
|
|
|
Dragan Fly III,IV,V
Motor wire harness (8 pin ) |
$9.95 |
|
 |
Dragan Fly III,IV,V
Motor connector connector (8 pin ) |
$4.95 |
|
 |
Dragan Fly motor mount | 5.95 |
|
 |
Dragan fly riser arm | 6.95 |
|
 |
Dragan Fly center cross section | 7.95 |
|
 |
Draganfly Ti V clear dome | 14.95 |
|
 |
Dragan Fly carbon fiber arm | 3.95 |
|
 |
Draganfly Carbon Fiber Base | 14.95 |
|
 |
Dragan Fly
I,II,III,IV,V
Precision steel ball bearing (.125 x .250 x .093 Flanged) |
$4.95 |
|
 |
X-PRO carbon fiber, counter clock wise rotor blades, one pair | $69.95 |
|
 |
X-PRO carbon fiber, clock wise rotor blades, one pair | $69.95 |
|
|
|
X-PRO Precision steel ball bearing (.187 X .312 X .125 Flanged) | $6.95 |
|
 |
X-PRO Main rotor Pulley
counter clock wise |
$29.95 |
|
 |
X-PRO Main rotor Pulley
clock wise |
$29.95 |
|
 |
X-PRO carbon fiber, Main rotor hub ( 2 blade version) | $14.95 |
|
 |
X-PRO Titanium
main rotor shaft (includes 3 "C" clips) |
$12.95 |
|
 |
X-PRO Kevlar Main rotor drive belt (standard version) | $6.95 |
|
 |
X-PRO Nylon base plate bolts (set of 8) | $9.95 |
|
 |
X-PRO Nylon thumbnuts (set of 8) |
$9.95 |
|
 |
X-PRO Rotor blade retention bolts (set of 8) | $5.95 |
|
 |
X-PRO Nylon spacers (set of 8) |
$7.95 |
|
 |
X-PRO Rotor blade mounting nuts (set of 8) | $4.95 |
|
 |
X-PRO carbon fiber, motor
mount (standard brushed motor) |
$24.95 |
|
 |
X-PRO Carbon fiber main base plate | $45.00 |
|
 |
X-PRO Metal canopy mounting brackets (set of 4) | $9.95 |
|
 |
X-PRO 6 inch Clear dome (includes 4 mounting grommets) |
$29.95 |
|
 |
X-PRO Standard motor with aluminum pinion pulley | $29.95 |
|
 |
X-PRO Standard pinion pulley | $14.44 |
|
 |
X-PRO Upgrade to Tri
rotor setup NOT recommended for standard version motors |
$169.50 |
|
 |
X-PRO Tri rotor hubs (set of 4) | $45.50 |
|
 |
X-PRO carbon fiber, Main rotor hub ( 3 blade version) | $17.95 |
|
 |
X-PRO replacement arm with gold anodized fittings | $135.50 |
|
 |
X-PRO Aluminum gold anodized rizer | $59.95 |
|
