Draganfly II,IV,V Motor Harness Wiring Diagram

+

Pin #    Wire Color        Description

1  <    Blue                     Right motor, red dot

2        Black                    Right motor

3        Green                    Left Motor,  red dot

4        Black                    Left Motor

5        Black                    Rear motor

6        Yellow                 Rear motor, red dot

7        Black                    Front motor

8         Red                     Front motor, red dot

The black wire for each motor connects to the terminal on the motor that DOES NOT have the red dot nearby.

The colored wire for each motor connects to the terminal with the red dot adjacent to it.

All motors MUST have a filter capacitor installed across the motor terminals with the leads of the capacitor insulated with shrink tubing or similar product to prevent shorting to motor case.  Failure to insulate these leads will cause damage to the control board , wire harness, and will present a possible fire hazard.

Copyright 2005 Spectrolutions Inc.  All rights reserved.  For personal use only